The Studio blog
When you are a new violinist (or the parent of one), tuning your violin can be a daunting task at first! With a little bit of time and practice it will become easier, but in the meantime, here are some tips to help you out.
If you have a violin that isn’t used to being in tune it is going to take some time for the strings to settle into the correct pitch, but if you consistently tune it you will find it needs less adjusting day after day. Most violins come with a tuner that can be clipped on. These tend to be most helpful when your strings are not far off pitch, so they work best once you have a stable G-D-A-E tuning.
For the tough cases you should use a reference pitch to match before trying to use the tuner. Here are some options for doing so:
1. If you have a keyboard or access to a piano (that is tuned frequently), the notes to tune to are shown in the picture on the right.
2. There are many free tuning apps available and many of them have a “tuning fork” function that plays pitches for you. An “A” tuned to 440 Hz is the standard pitch for tuning and most apps that have this option will allow you to adjust the note up or down from there.
3. Another option is to use YouTube videos. There are some available of sustained tuning notes for violin strings.
Now for some tips on the mechanics of tuning:
1. There are two ways to adjust pitch on most violins: the pegs and the fine tuners. The pegs should be used to make larger adjustments to the pitch and the fine tuners should be used for small adjustments, (like when the correct note is recognizable to your tuner, but you don’t have a green light).
2. You will notice that the slightest turn of a peg will give you a lot of change in pitch, so go slowly. (If you are holding the violin facing you, turning the peg up toward the scroll will make the pitch higher).
3. The peg might be stuck pretty tight, in which case you can loosen it by turning it slightly down first. As you adjust the peg, you will want to apply steady pressure inward. This helps the peg stay securely in place.
4. If your violin is really out of tune and you need to do some major adjusting, get all the strings close to G-D-A-E using the pegs before fine tuning them. You might tune your A-string perfectly, but then the changes you make to D and G could alter the pitch on A again. So save precise adjustments for last.
Fine Tuners Pegs
Yes, it can!
I was getting my bow re-haired at Kenmore Violins recently and was able to ask the shop owner that very question. He told me that rosin does indeed become less effective if it dries out. How long a block of rosin remains useful has to do with the quality of the rosin and the climate you are in. High quality rosin is pure. Rosin is the solid form of resin acquired from conifers, and cheaper brands (that often come with rental instruments) can contain less than 50% pure rosin in them.
So here is what I learned:
If your rosin is leaving a thick, white layer of dust on your instrument the rosin is not pure.
You should never have to scratch up the surface of your rosin in order to apply it.
You wouldn’t need to use a lot of high quality rosin, a little goes a long way.
Be mindful of where you buy your rosin from. Large retail music stores likely purchase rosin from suppliers in bulk, and the one you are buying could very well be 10 years old by the time it gets to you. Your local violin shop/luthier will probably have rosin to sell that they order in smaller quantities so what you buy is newer.
You get what you pay for, so the more you are willing to spend on a block of rosin the purer it is likely to be.
(D’Addario produces quality rosins that are not very expensive and a good option for beginning students).
If you leave your rosin in a hot, dry climate it will become dry and brittle, so keep it with your instrument. You are keeping that in a stable climate, yes?
And finally, how do you know if your rosin has gone bad? The rosin should be soft enough that when you draw your bow hair across it, a dusty path will be left on the block, (as shown in the image). If you do that and the block remains shiny or there is not any dust left in the bow’s path, then your rosin has hardened and is no longer of good service to you.
Here is some basic information about taking good care of your instrument.
Your violin is delicate and sensitive to variations in temperature and humidity. When you are not playing your instrument, it should be kept in a hard case, out of direct sunlight, and out of cold drafts. It is also inadvisable to leave your violin in a car for extended periods of time. The reason for all of this is that variations in temperature can cause cracks in the wood or blisters in the varnish that would require repair.
The varnish on the violin’s body is vulnerable to the oils and sweat on your hands, so to protect the instrument's shiny finish, it is a good idea to handle it by the neck as much as possible and make a habit of washing your hands before you play. Equally detrimental to the finish is allowing rosin dust to build up. After each time you play, clean the dust off the strings, fingerboard, and body with a soft cloth. If you find fingerprints on your violin, you can use a slightly damp cloth to wipe them off. If your varnish becomes really dull in places, it is best to take your violin to a luthier so they can clean and polish it for you, or get their recommendation for one you can use yourself. Violin cleaners are readily available, but if you are concerned about maintaining the value of your instrument, defer to the professionals before using any.
Your bow is strung with horse hair, which has microscopic barbs all over each strand. These barbs are responsible in part for the friction that produces sound when you draw your bow across the strings. That being the case, the oil and sweat on your hands will ruin the hair if you touch it so try not to.
When you are preparing to play, tighten the hair enough so that it is not touching the wood, but not so tight that you lose the concave curve of the bow. You will need to regularly apply rosin, but probably not every time you play. You should apply enough for your bow to easily grip the string and not feel slippery, but if you are creating clouds of rosin dust you have used too much. When you are finished playing loosen the bow hair before storing it.